Модуль расширения Q-SYS I/O-8 Flex для цифровой системы обработки и распределения аудио Q-SYS.
- Inputs/Outputs
- Audio Flex Channel Capacity 8
- Audio Flex Channel Assignments Each channel can be configured as a mic/line input or as a line output (configured through Q-SYS Designer software)
- Rear Panel Indicators “Link”, “Speed” and “Activity” LEDs on all LAN ports
- USB Inputs & Outputs
- USB Audio Bridging Up to 8x8 channels of digital audio in/out via software definable USB instances advertised to the USB Host operating system
- USB B (device port):
- Bit depth: 16-bit, 24-bit (configured in Q-SYS Designer software)
- USB Channel Capacity: 8x8
- Sample Rate: 48kHz
- Controls
- Front Panel Controls
- “NEXT” OLED page forward capacitive touch button
- “ID” device identification capacitive touch button
- “Clear Network Settings” - invoked when “NEXT” and “ID” are pressed simultaneously
- Front Panel Connectors AUX USB: USB Host x2 (Type A connectors)
- Rear Panel Connectors
- Audio Flex I/O: 12-pos blue Euro Block x2
- GPIO: 10-pos black Euro Block x2 (GPI = 1x10, GPO = 1x10)
- RS232: 3-pos black Euro Block
- AUX USB Host: USB Host x2 (Type A connectors)
- AUX USB Device: USB Device Port (Type B connector)
- Media Network LAN A/PoE+ Power In : RJ45 1000 Mbps
- Media Network LAN B: RJ45 1000 Mbps
- AUX PWR In: 2-pos green Euro block
- GPIO
- General Purpose Inputs 0-24VDC analog input or contact closure
- General Purpose Outputs Open collector, 24VDC at 200mA max, internal pullup to 3.3V
- GPIO 12 VDC Power Pins 12VDC out at 100mA max
- Miscellaneous
- PoE+ Power Input IEEE 802.3at compliant powered device, PoE+ power supplied through LAN A port
- External Power Input 24VDC, 1.2A supplied via the external power input, may be used as the primary power source or as a backup to the PoE+ source
- Regulatory
- FCC 47 CFR Part 15 Class A, IC ICES-003, CE (EN55032, EN55035), EU RoHS directive 2011/65/EU, WEEE directive 2012/19/EU, China RoHS directive GB/T26572, EAC, RTL
- Product Dimensions 8.66" x 9.43" x 1.75" (220mm x 240mm x 44mm), 1RU half rack
- Included Accessories Connector kit, rack ears, surface mount kit, installation manual, USB cable (Type A to Type B)