Однополосная акустическая система 650Вт продолж. мощн., 4 Ом, 120Вт - транс., 200 см колонна линейного массива из 32 x 2” драйверов, вертикальное покрытие переключаемое 30° или 15° , переключатель эквализации music (гладкая АЧХ)/speech, 80 Гц – 20 кГц, лира в комплекте, 14,6 кг
Components | Thirty-two 50 mm (2 in) Full-Range Drivers | |
Frequency Range (-10 dB) | 80 Hz – 20 kHz | |
Frequency Response (±3 dB) | 130 Hz – 18 kHz (narrow coverage, music mode setting) | |
Coverage - Vertical | Narrow Mode:
15° (500 Hz – 16 kHz, +15°/-2° [<60° down to 220 Hz, <90° down to 140 Hz]) Broad Mode: 30° (400 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, < 90° down to 140 Hz]) Asymmetrical Progressive-Gradient Mode: (Top speaker module set at “Narrow” and bottom speaker module at “Broad”, for “J-type” coverage, sending higher sound levels toward the far area of the listening space): 22.°(+7° from aiming axis up; -15° from aiming axis down, 300 Hz – 12 kHz, +15°/-8°, [<60° down to 220 Hz, <90° down to 140 Hz]) | |
Coverage - Horizontal | 150° (ave, 1 kHz – 4 kHz, ±20°) | |
Sensitivity - Narrow | (speech mode): 95 dB (2 kHz – 5 kHz)
(music mode): 92 dB (150 Hz – 18 kHz) | |
Sensitivity - Broad | (speech mode): 93 dB (2 kHz – 5 kHz)
(music mode): 90 dB (150 Hz– 18 kHz) | |
Sensitivity - Asymmetrical Progressive-Gradient Mode
(on-axis) | (speech mode): 94 dB (2 kHz – 5 kHz)
(music mode): 91 dB (150 Hz – 18 kHz) | |
Nominal Impedance (direct) | 8Ω per half (top and bottom) for 4 ohms total (in thru mode).
Min-Z for system = 2.9Ω. | |
Hookup | Ensure identical polarity of hookup – for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended. | |
Power Capacity (thru setting) | 650W (2600W peak), 2 hrs
400W (1600W peak) 100 hrs | |
Max SPL - Narrow | (speech mode): 123 dB cont ave (129 dB peak)
(music mode): 120 dB cont ave (126 dB peak) | |
Max SPL - Broad | (speech mode): 121 dB cont ave (127 dB peak)
(music mode): 118 dB cont ave (124 dB peak) | |
Max SPL - Asymmetrical Progressive-Gradient Mode
(on-axis) | (speech mode): 122 dB cont ave (128 dB peak)
(music mode): 119 dB cont ave (125 dB peak) | |
70V/100V Transformer Type | Set individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (with top & bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4Ω. Max. insertion loss less than 1 dB at any tap. | |
Enclosure | Fiberglass reinforced ABS cabinet, painted aluminum grille | |
Connectors | Two (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), or bare wire (up to 12 AWC/2.5 mm2) | |
Outdoor Capability | IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr saltspray resistant. | |
Colors | Black or White (-WH) | |
Configuration | Two pieces (top and bottom half), each 100 cm tall, connected together via Coupler Plate. Top/bottom orientation of each piece must be observed. | |
Insert Points | 28 M6 insert points on back panel (36 total with 8 center points being utilized by the Coupler Plate). | |
Mounting | Included swivel (pan) / tilt wall bracket (must be mounted to threaded points on Coupler Plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, as well as 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) located on back panel. Threaded mounting points can be utilized for suspension. Compatible with OmniMount 30.0 brackets | |
Dimensions (H x W x D) | 2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in) | |
Net Weight | 14.6 kg (33 lb) | |
Included Accessories | Swivel (pan) / tilt wall bracket, Coupler plate | |
Optional Accessories | MTC-PC2 terminal panel cover
MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required) MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required) |